4.4.8 Parallel Mode Settings
This screen allows you to change the Parallel Mode settings that are Linking the desk phone and handset due
to have the relation with master and slave. ( ® see 6.6 Pairing (Parallel Mode))
4.4.8.1 Parallel Mode
Slave Handset Number (Master Desk Phone Number 1–8)
Description Selects handset number for the cordless desktop handset (KX-TPA65)
when paired handsets are connected in parallel.
Value Range -: Off, Handset 1–8
Default Value -
Configuration File Reference PARALLEL_HSNOm (Page 347)
Mode (Master Desk Phone Number 1–8)
Description Selects the behavior of paired extensions when going off-hook during
a call.
Value Range
• Busy
• Take Over Call
Default Value Take Over Call
Configuration File Reference PARALLEL_MODEm (Page 348)
4.4.9 Delete Handset
This screen allows you to confirm and delete registered handsets from the base unit.
Registered handsets are indicated by enabled check boxes in "Registration Number". Grayed out check boxes
indicate handset numbers that are not registered on the base unit. To delete handsets, select the check boxes
128 Administrator Guide Document Version 2017-07
4.4.9 Delete Handset