Description Specifies the subnet mask for IPv4.
Note
• This setting is available only when "CONNECTION_TYPE" is
set to "0".
• When you specify this parameter, you must specify
"STATIC_IP_ADDRESS" together in a configuration file.
Value Range Max. 15 characters
n.n.n.n [n=0–255]
Default Value Empty string
Web User Interface Reference Subnet Mask (Page 85)
STATIC_GATEWAY
Value Format IPADDR
Description Specifies the IP address of the default gateway for the IPv4 network
where the unit is connected.
Note
• This setting is available only when "CONNECTION_TYPE" is
set to "0".
• When you specify this parameter, you must specify
"STATIC_IP_ADDRESS" and "STATIC_SUBNET" together in
a configuration file.
Value Range Max. 15 characters
n.n.n.n [n=0–255]
Default Value Empty string
Web User Interface Reference Default Gateway (Page 86)
USER_DNS1_ADDR
Value Format IPADDR
Description Specifies the IP address of the primary DNS server for IPv4.
Note
• This setting is available only when "CONNECTION_TYPE" is
set to "0".
Value Range Max. 15 characters
n.n.n.n [n=0–255]
Default Value Empty string
Web User Interface Reference DNS1 (Page 86)
Document Version 2017-07 Administrator Guide 213
5.3.3 Basic Network Settings