Panasonic KX-TGP600 - Phone User Interface Programming

3.1 Phone User Interface Programming
This section provides information about the features that can be configured directly from the unit, but that are
not mentioned in the Operating Instructions.
3.1.1 Opening/Closing the Web Port
To access the Web user interface, you must open the unit’s Web port beforehand.
To open the unit’s Web port
1.
/
2. [ ]/[ ]/[ ]/[ ]: ®
OK
3. [ ]/[ ]: "Other Option" ®
OK
4. [
]/[ ]: "Embedded Web" ®
OK
5. [ ]/[ ]: "On" for "Embedded Web" ®
OK
To close the unit’s Web port
1.
/
2. [ ]/[ ]/[ ]/[ ]: ®
OK
3. [ ]/[ ]: "Other Option" ®
OK
4. [
]/[ ]: "Embedded Web" ®
OK
5. [ ]/[ ]: "Off" for "Embedded Web" ®
OK
58 Administrator Guide Document Version 2017-07
3.1.1 Opening/Closing the Web Port