Panasonic KX-TGP600 - General Information on the Configuration Files

5.2 General Information on the Configuration Files
5.2.1 Configuration File Parameters
The information on each parameter that can be written in a configuration file is shown in the tables below. The
information includes parameter name (as the title of the table), value format, description, permitted value range,
default value of each parameter, phone user interface reference, and Web user interface reference.
Parameter Name
This is the system-predefined parameter name and cannot be changed.
Note
• Certain parameter names end with "_n". This signifies that these settings can be made to each line
individually. The number of lines available varies depending on the phone being used, as follows:
– KX-TGP600: 1–8
Value Format
Each parameter value is categorized into Integer, Boolean, or String. Some parameters require a composite
form such as "Comma-separated Integer" or "Comma-separated String".
• Integer: a numerical value, described as a sequence of numerical characters, optionally preceded by a
"-" (minus)
An empty string is not allowed.
• Boolean: "Y" or "N"
• String: sequence of alphanumerical characters
For details about available characters, see 5.2.2 Characters Available for String Values.
• Comma-separated Integer: a list of integers, separated by commas
No space characters are allowed.
• Comma-separated String: a list of strings, separated by commas
No space characters are allowed.
• IPADDR: IPv4 address format.
• IPADDR-V6: IPv6 address format (can be abbreviated).
Description
Describes the details of the parameter.
Value Range
Indicates the permitted value range of the parameter.
Default Value
Indicates the factory default value of the parameter.
Actual default values may vary depending on your phone system dealer/service provider.
Phone User Interface Reference
Provides the reference page of the corresponding parameter in phone user interface programming.
Web User Interface Reference
Provides the reference page of the corresponding parameter in Web user interface programming.
Document Version 2017-07 Administrator Guide 199
5.2.1 Configuration File Parameters