Panasonic KX-TGP600 - Rtcp_Enable_N

Web User Interface Reference RTP Packet Time (Page 140)
RTCP_ENABLE_n
Parameter Name Example RTCP_ENABLE_1, RTCP_ENABLE_2, …, RTCP_ENABLE_8
Value Format BOOLEAN
Description Specifies whether to enable or disable RTCP (Real-Time Transport
Control Protocol). For details, refer to RFC 3550.
Value Range
• Y (Enable RTCP)
• N (Disable RTCP)
Default Value
N
Web User Interface Reference Enable RTCP (Page 146)
RTCP_INTVL_n
Parameter Name Example RTCP_INTVL_1, RTCP_INTVL_2, …, RTCP_INTVL_8
Value Format INTEGER
Description Specifies the interval, in seconds, between RTCP/RTCP-XR packets.
Value Range 5–65535
Default Value 5
Web User Interface Reference RTCP&RTCP-XR Interval (Page 147)
RTCP_SEND_BY_SDP_n
Parameter Name Example RTCP_SEND_BY_SDP_1, RTCP_SEND_BY_SDP_2, …,
RTCP_SEND_BY_SDP_8
Value Format INTEGER
Description Specifies whether to send RTCP signals by SDP (Session Description
Protocol).
Value Range 0–1
– 0: Send RTCP signals using the value specified in
"RTCP_INTVL_n", if the "RTCP_ENABLE_n" parameter is enabled.
– 1: Send RTCP signals using the value specified in the SDP attribute
"a=rtcp:".
Default Value 0
Document Version 2017-07 Administrator Guide 305
5.3.26 RTP/RTCP/RTCP-XR Settings