Value Range Max. 24 characters
Default Value Not stored.
Configuration File Reference MPAGE_LABELm (Page 256)
Enable Transmission (Group 1–5)
Description Selects the sending multi-cast paging.
Value Range
• Yes
• No
Default Value No
Configuration File Reference MPAGE_SEND_ENABLEm (Page 257)
4.3.6  LDAP Settings
This screen allows you to change the LDAP Settings.
4.3.6.1  LDAP
Enable LDAP
Description Selects whether to enable or disable the LDAP service.
Value Range
• Yes
• No
Default Value No
Configuration File Reference LDAP_ENABLE (Page 249)
Document Version  2017-07   Administrator Guide 97
4.3.6 LDAP Settings