Panasonic KX-TGP600 - Sip_Hold_Attribute_N

Value Range
• Y (Enable RFC 2543 Call Hold)
• N (Disable RFC 2543 Call Hold)
Note
• If set to "Y", the "c=0.0.0.0" syntax will be set in SDP when
sending a re-INVITE message to hold the call.
• If set to "N", the "c=x.x.x.x" syntax will be set in SDP.
Default Value
Y
Web User Interface Reference Enable c=0.0.0.0 Hold (RFC 2543) (Page 139)
SIP_HOLD_ATTRIBUTE_n
Parameter Name Example SIP_HOLD_ATTRIBUTE_1, SIP_HOLD_ATTRIBUTE_2, …,
SIP_HOLD_ATTRIBUTE_8
Value Format INTEGER
Description Specifies whether to set "a=inactive " or not when the call is on hold.
Value Range
• 0: send only
• 1: inactive
Default Value 0
SDP_USER_ID_n
Parameter Name Example SDP_USER_ID_1, SDP_USER_ID_2, …, SDP_USER_ID_8
Value Format STRING
Description Specifies the user ID used in the "o=" line field of SDP.
Value Range Max. 32 characters
Default Value Empty string
TELEVENT_PAYLOAD
Value Format INTEGER
Description Specifies the RFC 2833 payload type for DTMF tones.
Note
• This setting is available only when "DTMF_METHOD_n" is set to
"0".
Value Range 96–127
Default Value 101
Web User Interface Reference Telephone-event Payload Type (Page 141)
290 Administrator Guide Document Version 2017-07
5.3.22 SIP Settings