Value Range 1–16 characters
Default Value Empty string
PCAP_REMOTE_PASS
Value Format STRING
Description Specifies the password of the IP phone whose packets will be captured
using the Wireshark utility (PCAP Remote).
Value Range 0, 6–64 characters
Default Value Empty string
PCAP_REMOTE_PORT
Value Format INTEGER
Description Specifies the port of the IP phone to use for capturing packets using the
Wireshark utility (PCAP Remote).
Value Range 1–65535
Default Value 2002
DTMF_OUT_ENABLE
Value Format BOOLEAN
Description Specifies whether received outband DTMF signals are output audibly.
Value Range
• Y: Enable audible outband DTMF
• N: Disable
Default Value
Y
CANCEL_OPERATION_MODE
Value Format INTEGER
Description Specifies the operation of the [CANCEL] button when a line is in use.
Value Range
• 0: Cancel the current operation
• 1: Return to standby mode
Default Value 0
RANGE_ALARM_ENABLE
Value Format BOOLEAN
206 Administrator Guide Document Version 2017-07
5.3.1 System Settings
To Next Page
Loading...
