4.3.1.2 IPv4
Connection Mode
Description Selects the IP address setting mode for IPv4.
Value Range
• Static
• DHCP
Default Value DHCP
Configuration File Reference CONNECTION_TYPE (Page 212)
DHCP Host Name
Description Specifies the host name to option12 in DHCPv4 or option15 in DHCPv6.
Note
• This setting is available only when [Connection Mode] is set
to [DHCP].
Value Range Max. 64 characters
Note
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
Default Value {MODEL}
Configuration File Reference DHCP_HOST_NAME (Page 214)
IP Address
Description Specifies the IP address for IPv4.
Note
• This setting is available only when [Connection Mode] is set
to [Static].
Value Range Max. 15 characters
n.n.n.n [n=0–255]
Default Value Not stored.
Configuration File Reference STATIC_IP_ADDRESS (Page 212)
Subnet Mask
Description Specifies the subnet mask for IPv4.
Note
• This setting is available only when [Connection Mode] is set
to [Static].
Document Version 2017-07 Administrator Guide 85
4.3.1 Basic Network Settings