Panasonic KX-TGP600 - 10.2 Revision History; Software File Version 01.129 or later; Software File Version 02.100 or later; Software File Version 03.000 or later

4.7.5.1 Export Logging File
Logging File Type
Description Selects the Logging File Type setting.
Value Range
• Power Down
• Event
• SIP Packet
Note
• The line break code for the log file is <LF>.
• If a file is exported when Power Down is selected, the saved file
is power.log.
• If a file is exported when Event is selected, the saved file is
event_log.txt.
• If a file is exported when SIP Packet is selected, the saved file
is sip_trace_log.txt.
Default Value Power Down
4.7.6 Reset to Defaults
This screen allows you to reset the carrier default settings made through the Web user interface to their default
values by clicking [Reset to Carrier Defaults]. After you click this button, a dialog box is displayed, asking
whether you want to reset the settings. Click OK to reset, or Cancel not to.
Notice
• After resetting the settings, the unit will restart even if it is being accessed through the phone user
interface, or on calls.
Note
• You can specify carrier default using configuration parameter extensions. Those parameters will be
reset to the specified carrier default values (see Parameter Extensions).
4.7.7 Restart
This screen allows you to restart the unit by clicking [Restart]. After you click this button, a dialog box is
displayed, asking whether you want to restart the unit. Click OK to perform a restart, or Cancel not to.
Document Version 2017-07 Administrator Guide 175
4.7.7 Restart