INTDIGIT_TIM
Value Format INTEGER
Description Specifies the length of time, in seconds, within which subsequent digits
of a dial number must be dialed.
Value Range 1–15 (s)
Default Value 5
Web User Interface Reference Inter-digit Timeout (Page 152)
POUND_KEY_DELIMITER_ENABLE
Value Format BOOLEAN
Description Specifies whether the # key is treated as a regular dialed digit or a
delimiter, when dialed as or after the second digit.
Value Range
• Y (# is treated as the end of dialing delimiter)
• N (# is treated as a regular dialed digit)
Default Value
Y
Web User Interface Reference Enable # Key as delimiter (Page 153)
POST_DIAL_TALK_ENABLE
Value Format BOOLEAN
Description Specifies whether the Talk-key is treated as a calling button or as a
switch for SP-phone mode during post dialing (except KX-TPA65).
Value Range
• Y: The Talk-key is used to make the call.
• N: The Talk-key is used as a switch for SP-phone mode.
Default Value
N
RINGTONE_SETTING_HSy_n
Parameter Name Example RINGTONE_SETTING_HS1_1, RINGTONE_SETTING_HS1_2, …,
RINGTONE_SETTING_HS1_8,
RINGTONE_SETTING_HS2_1, RINGTONE_SETTING_HS2_2, …,
RINGTONE_SETTING_HS2_8,
RINGTONE_SETTING_HS8_1, RINGTONE_SETTING_HS8_2, …,
RINGTONE_SETTING_HS8_8
Value Format INTEGER
Description Specifies the ringtone to each line for a handset.
Value Range 1–32
Document Version 2017-07 Administrator Guide 315
5.3.30 Telephone Settings
To Next Page
Loading...
