Panasonic KX-TGP600 - Sip_Trunk_Mode_Enable

SIP_TRUNK_MODE_ENABLE
Value Format BOOLEAN
Description Specifies whether you are using a SIP trunk service or not.
Value Range
• Y: Enable the usage of a SIP trunk service
• N: Disable
Default Value
N
Web User Interface Reference Enable SIP Trunk Service (Page 111)
SIP_NON_REGISTER_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable or disable operation without registering the
SIP UA (user agent).
Note
• This setting is available only when
[SIP_TRUNK_MODE_ENABLE] is set to [Y].
Value Range
• Y: Enable operation without registering the SIP UA
• N: Disable
Default Value
N
Web User Interface Reference Enable Non-Registering SIP UA (Page 112)
RTP_KEEP_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable or disable the continuous sending of RTP
packets while a call is on hold.
Note
• This setting is available only when
[SIP_TRUNK_MODE_ENABLE] is set to [Y].
Value Range
• Y: Enable the continuous sending of RTP packets while a call is on
hold
• N: Disable
Default Value
N
Web User Interface Reference Send RTP on Call Hold (Page 112)
FWD_DND_MENU_ENABLE
Value Format BOOLEAN
202 Administrator Guide Document Version 2017-07
5.3.1 System Settings