Panasonic KX-TGP600 - SIP Settings

4.5 VoIP
This section provides detailed descriptions about all the settings classified under the [VoIP] tab.
4.5.1 SIP Settings
This screen allows you to change the SIP settings that are common to all lines.
4.5.1.1 User Agent
User Agent
Description Specifies the text string to send as the user agent in the headers of SIP
messages.
Value Range Max. 64 characters
Note
• If "{mac}" is included in this field, it will be replaced with the
unit’s MAC address in lower-case.
• If "{MAC}" is included in this field, it will be replaced with the
unit’s MAC address in upper-case.
• If "{MODEL}" is included in this field, it will be replaced with the
unit’s model name.
• If "{fwver}" is included in this field, it will be replaced with the
firmware version of the unit.
• If "{sipver}" is included in this parameter, it will be replaced with
the SIP software version of the unit.
Default Value Panasonic-{MODEL}/{fwver} ({mac})
130 Administrator Guide Document Version 2017-07
4.5.1 SIP Settings