Value Range 0: Original
1: Mute
2: Menu
3: Blind
4: Redial
5: Conference
6: Flash/Recall
7: Incoming Log
8: Outgoing Log
9: Phonebook
10: Park
11: Intercom
12: Pause
13: Noise Reduction (KX-TPA60 only)
14: Private Hold
Note
• The following features are applied to the soft key only when the
corresponding parameters are enabled. Otherwise, the soft key
will remain in its original setting.
– Blind: BLIND_TRANSFER_ENABLE
– Park: CALLPARK_KEY_ENABLE
– Intercom: INTERCOM_ENABLE
– Pause: PAUSE_INPUT_ENABLE
– Private Hold: PRIVATE_HOLD_ENABLE
Default Value 0
TALKING_SOFT_KEY_B
Value Format INTEGER
Description Specifies the display icon of soft key B during a call.
350 Administrator Guide Document Version 2017-07
5.3.32 Call Control Settings
To Next Page
Loading...
