Value Range Max. 15 characters
n.n.n.n [n=0–255]
Default Value Not stored.
Configuration File Reference STATIC_SUBNET (Page 212)
Default Gateway
Description Specifies the default gateway for IPv4.
Note
• This setting is available only when [Connection Mode] is set
to [Static].
Value Range Max. 15 characters
n.n.n.n [n=0–255]
Default Value Not stored.
Configuration File Reference STATIC_GATEWAY (Page 213)
Auto DNS via DHCP
Description Selects whether to enable or disable the DNS server obtained by
DHCPv4.
Note
• This setting is available only when [Connection Mode] is set
to [DHCP].
Value Range
• Yes: Use DNS obtained by DHCPv4
• No: Not use (use static DNS)
Default Value Yes
Configuration File Reference DHCP_DNS_ENABLE (Page 214)
DNS1
Description Specifies the IP address of primary DNS server for IPv4.
Value Range Max. 15 characters
n.n.n.n [n=0–255]
Default Value Not stored.
Configuration File Reference USER_DNS1_ADDR (Page 213)
DNS2
Description Specifies the IP address of secondary DNS server for IPv4.
86 Administrator Guide Document Version 2017-07
4.3.1 Basic Network Settings
To Next Page
Loading...
