ADMIN_ABILITY_ENABLE_HSy
Parameter Name Example ADMIN_ABILITY_ENABLE_HS1,
ADMIN_ABILITY_ENABLE_HS2, …,
ADMIN_ABILITY_ENABLE_HS8
Value Format BOOLEAN
Description Specifies admin rights for each handset.
Note
If you attempt to configure System Settings without enabling admin
rights, an error will occur and configuration will not be possible.
Value Range
• Y: Admin
• N: Non Admin
Default Value
Y
Web User Interface Reference Enable Admin Ability (Page 125)
HANDSET_NAME_HSy
Parameter Name Example HANDSET_NAME_HS1, HANDSET_NAME_HS2, …,
HANDSET_NAME_HS8
Value Format STRING
Description Specifies the handset name.
Value Range Max. 16 characters
Default Value HANDSET_NAME_HS1="Handset 1"
HANDSET_NAME_HS2="Handset 2"
HANDSET_NAME_HS3="Handset 3"
HANDSET_NAME_HS4="Handset 4"
HANDSET_NAME_HS5="Handset 5"
HANDSET_NAME_HS6="Handset 6"
HANDSET_NAME_HS7="Handset 7"
HANDSET_NAME_HS8="Handset 8"
Web User Interface Reference Handset Name (Page 123)
EMERGENCY_CALLx
Parameter Name Example EMERGENCY_CALL1, EMERGENCY_CALL2, …, EMERGENCY_CALL5
Value Format STRING
Description Specifies the emergency number. (Up to 5 emergency numbers)
Value Range Max. 32 characters (except &, ", ', :, ;, <, >)
Default Value Empty string
Web User Interface Reference 1–5 (Page 155)
342 Administrator Guide Document Version 2017-07
5.3.32 Call Control Settings
To Next Page
Loading...
