5.3.31 Tone Settings
OUTSIDE_DIAL_TONE_FRQ
Value Format Comma-separated Integer
Description Specifies the dual-tone frequencies, in hertz, of Second Dial Tone using
max. 2 whole numbers separated by a comma.
Value Range 0, 200–2000(Hz) (0=No tone)
Default Value 420
OUTSIDE_DIAL_TONE_GAIN
Value Format INTEGER
Description Specifies the gain, in decibels, of Second Dial Tone
Value Range -24–24 (dB)
Default Value 0
OUTSIDE_DIAL_TONE_RPT
Value Format INTEGER
Description Specifies whether Second Dial Tone is repeated.
Value Range
• 0: No Repeat
• 1: Repeat
Default Value 0
OUTSIDE_DIAL_TONE_TIMING
Value Format Comma-separated Integer
Description Specifies the pattern, in milliseconds, of Second Dial Tone using Max.
10 whole numbers (off 1, on 1, off 2, on 2…) separated by commas.
Value Range 0–16000 (msec) (0=Continuous)
Default Value 60,0
REORDER_TONE_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable reorder tone.
Value Range
• Y: Enable
• N: Disable
Document Version 2017-07 Administrator Guide 325
5.3.31 Tone Settings
To Next Page
Loading...
