NOM_DELAY_n
Parameter Name Example NOM_DELAY_1, NOM_DELAY_2, …, NOM_DELAY_8
Value Format INTEGER
Description Specifies the initial delay, in 10-millisecond units, of the jitter buffer.
Value Range
1–7 (´ 10 ms)
Note
• This setting is subject to the following conditions:
– This value must be greater than or equal to "MIN_DELAY"
– This value must be less than "MAX_DELAY"
Default Value 1
RTP_PORT_MIN
Value Format INTEGER
Description Specifies the lowest port number that the unit will use for RTP packets.
Value Range 1024–59598 (only even)
Default Value 16000
Web User Interface Reference Minimum RTP Port Number (Page 140)
RTP_PORT_MAX
Value Format INTEGER
Description Specifies the highest port number that the unit will use for RTP packets.
Value Range 1424–59998 (only even)
Default Value 20000
Web User Interface Reference Maximum RTP Port Number (Page 141)
RTP_PTIME
Value Format INTEGER
Description Specifies the interval, in milliseconds, between transmissions of RTP
packets.
Value Range
• 20
• 30
• 40
• 60
Default Value 20
304 Administrator Guide Document Version 2017-07
5.3.26 RTP/RTCP/RTCP-XR Settings
To Next Page
Loading...
