Panasonic KX-TGP600 - System Settings

5.3 System Settings
5.3.1 System Settings
MULTI_NUMBER_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable or disable the multi number mode.
Value Range
• Y: Enable multi number mode.
• N: Disable (1 to 1 mode)
Default Value
N
WIDEBAND_AUDIO_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable or disable the wide band audio. If you set
"Y", wide band audio and 4 simultaneous call are available. If you set
"N", only narrow band audio and 8 simultaneous call are available.
Value Range
• Y: Enable WB (simultaneous call is Max. 4)
• N: Disable (only NB, simultaneous call is Max. 8)
Default Value
N
CODEC_G722AMR_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable or disable the G.722.2 AMR-WB.
Value Range
• Y: Enable G.722.2 AMR
• N: Disable
Default Value
N
FACTORY_RESET_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable or disable the operation of factory default
and carrier default.
Value Range
• Y: Enable factory reset operation
• N: Disable
Default Value
Y
Document Version 2017-07 Administrator Guide 201
5.3.1 System Settings