Panasonic KX-TGP600 - Firmware Update Settings

Value Range
• Y: Enable
• N: Disable
Default Value
Y
5.3.7 Firmware Update Settings
FIRM_UPGRADE_ENABLE
Value Format BOOLEAN
Description Specifies whether to perform firmware updates when the unit detects a
newer version of firmware.
Note
• Local firmware updates from the Web user interface (® see
4.7.3 Upgrade Firmware) can be performed regardless of this
setting.
• Firmware updates using TR-069 can be performed regardless
of this setting.
Value Range
• Y (Enable firmware updates)
• N (Disable firmware updates)
Default Value
Y
Web User Interface Reference Enable Firmware Update (Page 172)
FIRM_FILE_PATH
Value Format STRING
Description Specifies the URL where the firmware file is stored.
Note
• This setting is available only when
"FIRM_UPGRADE_ENABLE" is set to "Y".
Value Range Max. 384 characters
Note
• If "{fwver}" is included in this parameter, it will be replaced with
the value specified in [Firmware Version]. For details about
the formats, see 2.1.3 Server Address Formats.
Default Value Empty string
Web User Interface Reference Firmware File URL (Page 173)
FIRM_VERSION
Value Format STRING
226 Administrator Guide Document Version 2017-07
5.3.7 Firmware Update Settings