Panasonic KX-TGP600 - Ipei_Autoregmode_Enable

IPEI_AUTOREGMODE_ENABLE
Value Format BOOLEAN
Description Specifies whether to perform the HS registration mode automatically
after IPEI was set.
Value Range
• Y: Enable automatically registration
• N: Disable
Default Value
N
IPEI_RESTRICTION_ENABLE
Value Format BOOLEAN
Description Specifies whether to perform the HS registration limit after IPEI was set.
Value Range
• Y: Enable registration limit
• N: Disable
Default Value
N
NEXT_REGISTERED_HS_NUMBER
Value Format INTEGER
Description Specifies the handset number to register or deregister.
• 0: The handset number will be registered in order starting with the
lowest available number. (1 to 8)
• 1–8: If the specified handset number is already registered, it will be
deregistered. If the specified handset number is not registered, it
will be registered.
Note
• If the handset IPEI parameters are registered on a base unit,
this setting is invalid.
Value Range 0–8
(0: Normal order, 1: handset 1, 2: handset 2, …, 8: handset 8)
Default Value 0
IPEI_CHANGE_HS_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable the ability to change handset registration
with IPEI.
Value Range
• Y: Enable changing
• N: Disable
Default Value
N
Document Version 2017-07 Administrator Guide 211
5.3.2 Handset Registration Settings