Panasonic KX-TGP600 - Vlan_Enable

Value Range
• 1: Auto Negotiation
• 2: 100Mbps/Full Duplex
• 3: 100Mbps/Half Duplex
• 4: 10Mbps/Full Duplex
• 5: 10Mbps/Half Duplex
Default Value 1
Web User Interface Reference LAN Port (Page 89)
VLAN_ENABLE
Value Format BOOLEAN
Description Specifies whether to use the VLAN feature to perform VoIP
communication securely.
Note
• You should specify "Y" for only one of "LLDP_ENABLE" or
"VLAN_ENABLE".
If "Y" is specified for two or more of the parameters above, the
settings are prioritized as follows: "VLAN_ENABLE" >
"LLDP_ENABLE". Therefore, if "Y" is specified for both
"VLAN_ENABLE" and "LLDP_ENABLE", the VLAN-related
settings are used.
Value Range
• Y (Enable)
• N (Disable)
Default Value
N
Web User Interface Reference Enable VLAN (Page 91)
VLAN_ID_IP_PHONE
Value Format INTEGER
Description Specifies the VLAN ID for this unit.
Value Range 0–4094
Default Value 2
Web User Interface Reference VLAN ID (Page 91)
VLAN_PRI_IP_PHONE
Value Format INTEGER
Description Specifies the priority number for the unit.
Value Range 0–7
Default Value 7
Document Version 2017-07 Administrator Guide 217
5.3.4 Ethernet Port Settings