Configuration File Reference CDP_INTERVAL (Page 218)
4.3.2.4 VLAN
Enable VLAN
Description Selects whether to use the VLAN feature to perform VoIP
communication securely.
Note
• You should specify "Yes" for only one of "Enable LLDP", or
"Enable VLAN".
• If "Yes" is specified for two or more of the parameters above,
the settings are prioritized as follows: "Enable VLAN" >
"Enable LLDP". Therefore, if "Yes" is specified for both
"Enable VLAN" and "Enable LLDP", the VLAN-related
settings are used.
Value Range
• Yes
• No
Default Value No
Configuration File Reference VLAN_ENABLE (Page 217)
VLAN ID
Description Specifies the VLAN ID.
Value Range 0–4094
Default Value 2
Configuration File Reference VLAN_ID_IP_PHONE (Page 217)
Priority
Description Selects the priority number.
Value Range 0–7
Default Value 7
Configuration File Reference VLAN_PRI_IP_PHONE (Page 217)
Document Version 2017-07 Administrator Guide 91
4.3.2 Ethernet Port Settings
To Next Page
Loading...
