Value Range Max. 64 characters
Note
• If "{mac}" is included in this parameter, it will be replaced with
the unit’s MAC address in lower-case.
• If "{MAC}" is included in this parameter, it will be replaced with
the unit’s MAC address in upper-case.
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
• If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Default Value Panasonic_{MODEL}/{fwver} ({mac})
Configuration File Reference HTTP_USER_AGENT (Page 227)
Authentication ID
Description Specifies the ID for the User account. If set, this name must be entered
to access the Web user interface at the User access level.
Value Range Max. 128 characters
Default Value Not stored.
Configuration File Reference HTTP_AUTH_ID (Page 228)
Authentication Password
Description Specifies the password for the User account. If set, this password must
be entered to access the Web user interface at the User access level.
Value Range Max. 128 characters
Default Value Not stored.
Configuration File Reference HTTP_AUTH_PASS (Page 228)
4.3.3.2 Proxy Server
Enable Proxy
Description Selects whether to enable or disable the HTTP proxy feature.
Value Range
• Yes
• No
Default Value No
Configuration File Reference HTTP_PROXY_ENABLE (Page 228)
Document Version 2017-07 Administrator Guide 93
4.3.3 HTTP Client Settings
To Next Page
Loading...
