Web User Interface Reference Priority (Page 91)
LLDP_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable or disable the LLDP-MED feature.
Note
• You should specify "Y" for only one of "LLDP_ENABLE", or
"VLAN_ENABLE". If "Y" is specified for two or more of the
parameters above, the settings are prioritized as follows:
VLAN_ENABLE >LLDP_ENABLE. Therefore, if "Y" is specified
for both "VLAN_ENABLE" and "LLDP_ENABLE", the
VLAN-related settings are used.
Value Range
• Y: Enable LLDP-MED
• N: Disable
Default Value
Y
Web User Interface Reference Enable LLDP (Page 90)
LLDP_INTERVAL
Value Format INTEGER
Description Specifies the interval, in seconds, between sending each LLDP frame.
Value Range 1–3600
Default Value 30
Web User Interface Reference Packet Interval (Page 90)
CDP_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable the CDP feature.
Value Range
• Y: Enable CDP
• N: Disable
Default Value
N
Web User Interface Reference Enable CDP (Page 90)
CDP_INTERVAL
Value Format INTEGER
218 Administrator Guide Document Version 2017-07
5.3.4 Ethernet Port Settings
To Next Page
Loading...
