4.3.2 Ethernet Port Settings
This screen allows you to change the connection mode of the Ethernet ports, LLDP and the VLAN settings.
Note
• When you change the settings on this screen and click [Save], after the message "Complete" has been
displayed, the unit will restart automatically with the new settings applied. If a unit is on a call when
"Complete" has been displayed, the unit will restart after the unit returns to idle.
4.3.2.1 Link Speed/Duplex Mode
LAN Port
Description Selects the connection mode (link speed and duplex mode) of the LAN
port.
Value Range
• Auto Negotiation
• 100Mbps/Full Duplex
• 100Mbps/Half Duplex
• 10Mbps/Full Duplex
• 10Mbps/Half Duplex
Default Value Auto Negotiation
Configuration File Reference PHY_MODE_LAN (Page 216)
Document Version 2017-07 Administrator Guide 89
4.3.2 Ethernet Port Settings
To Next Page
Loading...
