Panasonic KX-TGP600 - Executing Firmware Update

FIRM_VERSION="01.050"
FIRM_FILE_PATH="http://firm.example.com/firm/01.050.fw"
7.3 Executing Firmware Update
After configuring the firmware update settings in the configuration file, the firmware will be updated when the
configuration file is downloaded. The firmware update procedure is detailed below.
The firmware update process
Note
Downgrading the firmware is not recommended. Operation cannot be guaranteed after performing a
downgrade.
Step 1
The unit downloads a configuration file from the
provisioning server.
• For details about setting the timing of when
configuration files are downloaded, see
2.2.4 Downloading Configuration Files.
A
B
A
B
A Provisioning Server Address
B Configuration File
A. KX-TGP600
B. Provisioning Server
Step 2
The unit compares the version number of the
firmware in the configuration file to the unit’s current
firmware version.
(In this example, the unit is using version 01.000
and the configuration file specifies version 01.050.)
A
A
B
A Compare
A. KX-TGP600
Current Version 01.000
B. Provisioned Configuration File
FIRM_VERSION="01.050"
Document Version 2017-07 Administrator Guide 381
7.3 Executing Firmware Update