Firmware File URL
Description Specifies the URI where the firmware file is stored.
Note
• This setting is available only when [Enable Firmware
Update] is set to [Yes].
Value Range Max. 384 characters
Note
• If "{fwver}" is included in this parameter, it will be replaced with
the value specified in [Firmware Version]. For details about
the formats, see 2.1.3 Server Address Formats.
Default Value Not stored.
Configuration File Reference FIRM_FILE_PATH (Page 226)
4.7.3 Upgrade Firmware
This screen allows you to download the Upgrade Firmware data from a PC.
Note
• After the firmware has been successfully updated, the unit will restart automatically.
4.7.3.1 Upgrade Firmware
File Name
Description Specifies the path of the firmware file to be imported.
Value Range No limitation
Note
• There are no limitations for the field entry. However, it is
recommended that paths of less than 256 characters be used:
longer paths may cause longer data transfer times and result in
an internal error.
Default Value Not stored.
Document Version 2017-07 Administrator Guide 173
4.7.3 Upgrade Firmware
To Next Page
Loading...
