Panasonic KX-TGP600 - Add_Transport_Udp_N

Default Value
N
ADD_TRANSPORT_UDP_n
Parameter Name Example ADD_TRANSPORT_UDP_1, ADD_TRANSPORT_UDP_2, …,
ADD_TRANSPORT_UDP_8
Value Format BOOLEAN
Description Specifies whether to add the attribute "transport=udp" to the SIP header
URI.
Value Range
• Y (Add Transport UDP)
• N (Do not add Transport UDP)
Default Value
N
SIP_ADD_DIVERSION_n
Parameter Name Example SIP_ADD_DIVERSION_1, SIP_ADD_DIVERSION_2, …,
SIP_ADD_DIVERSION_8
Value Format INTEGER
Description Specifies whether to add Diversion header information.
Value Range 0–2
– 0: Do not add Diversion header information
– 1: Use own diversion information only for the Diversion header
– 2: Add diversion information to existing Diversion header
Default Value 0
TRANSFER_RECALL_TIM
Value Format INTEGER
Description Specifies the time that the original call is resumed when the forwarding
party does not response by Refer method for call transfer.
Value Range 0, 1–240
Default Value 0
SIGNAL_COMPRESSION_n
Parameter Name Example SIGNAL_COMPRESSION_1, SIGNAL_COMPRESSION_2, …,
SIGNAL_COMPRESSION_8
Value Format INTEGER
Description Specifies whether to use signal compression. When using signal
compression, select Required or Supported.
Document Version 2017-07 Administrator Guide 287
5.3.22 SIP Settings