Panasonic KX-TGP600 - Parallel_Modem

Description Specifies the handset number for the paired handset (KX-TPA60) when
connected in parallel. "m" refers to the master handset (KX-TPA65).
For details, see 6.6 Pairing (Parallel Mode).
Note
• Be sure to designate the KX-TPA65 as the master handset and
the KX-TPA60 as the slave handset. Paired handsets cannot
be configured for other pairings.
Value Range 0: Off, 1–8 (handset number)
Default Value 0
Web User Interface Reference Slave Handset Number (Master Desk Phone Number 1–8) (Page 128)
PARALLEL_MODEm
Parameter Name Example PARALLEL_MODE1, PARALLEL_MODE2, …, PARALLEL_MODE8
Value Format INTEGER
Description Specifies the off-hook behavior of the other handset when one handset
is in use.
For details, see 6.6 Pairing (Parallel Mode).
Value Range 0: Busy
1: Take over call
Default Value 1
Web User Interface Reference Mode (Master Desk Phone Number 1–8) (Page 128)
FWD_SYNCHRO_FORCE_DISABLE_n
Parameter Name Example FWD_SYNCHRO_FORCE_DISABLE_1,
FWD_SYNCHRO_FORCE_DISABLE_2, …,
FWD_SYNCHRO_FORCE_DISABLE_8
Value Format BOOLEAN
Description Specifies whether to synchronize the Call Forward settings in
"FWD_DND_SYNCHRO_ENABLE_n".
Value Range
• Y: Do not synchronize
• N: Synchronize
Default Value
N
CONF_SERVER_HOLD_ENABLE
Value Format BOOLEAN
Description Specifies whether to hold the call when connecting an N-party
conference.
348 Administrator Guide Document Version 2017-07
5.3.32 Call Control Settings