COUNTRY_CALLING_CODE
Value Format STRING
Description Specifies the country/area calling code to be used for comparative
purposes when dialing a number from the incoming call log that
contains a "+" symbol.
Value Range Max. 8 characters (consisting of 0–9)
Default Value Empty string
Web User Interface Reference Country Calling Code (Page 153)
NATIONAL_ACCESS_CODE
Value Format STRING
Description When dialing a number from the incoming call log that contains a "+"
symbol and the country calling code matches, the country calling code
is removed and the national access code is added.
Value Range Max. 8 characters (consisting of 0–9, *, and #)
Default Value Empty string
Web User Interface Reference National Access Code (Page 153)
IDLE_SOFT_KEY_A
Value Format INTEGER
Description Specifies the soft key (A) during IDLE state.
Value Range
• 1: Phonebook
• 2: Menu
• 3: Outgoing Call Log
• 4: Incoming Call Log
• 5: Redial
• 6: Page
• 7: Intercom
Note
• The following features are applied to the soft key only when the
corresponding parameters are enabled. Otherwise, the soft key
will remain in its original setting.
– Page: MPAGE_FUNCKEY_ENABLE
– Intercom: INTERCOM_ENABLE
Default Value 1
Web User Interface Reference Soft Key A (Left) (Page 124)
340 Administrator Guide Document Version 2017-07
5.3.32 Call Control Settings
To Next Page
Loading...
