Button Function
Save
Applies changes and displays a result message (® see Result Messages in
this section).
Cancel Discards changes. The settings on the current screen will return to the values
they had before being changed.
Refresh Updates the status information displayed on the screen. This button is
displayed in the upper-right area of the [Network Status] and [VoIP Status]
screens.
Entering Characters
In the Web user interface, when specifying a name, message, password, or other text item, you can enter any
of the ASCII characters displayed in the following table with a white background.
However, there are additional limitations for certain types of fields as follows:
• Number field
– You may only enter a sequence of numeric characters.
• IP Address field
– You can enter the IP address using dotted-decimal notation (i.e., "n.n.n.n" where n=0–255).
• FQDN field
– You can enter the IP address using dotted-decimal notation (i.e., "n.n.n.n" where n=0–255).
– With IPv6, the IP address is enclosed in square brackets ("[" and "]").
Example: http://[2001:db8:1f70::999:de8:7648:6e8]/
• Display Name field (® see [Display Name] in 4.6.3.1 Call Features)
– This is the only field in which you can enter Unicode characters.
Result Messages
When you click [Save] after changing the settings on the current configuration screen, one of the following
messages will appear in the upper-left area of the current configuration screen:
34 Administrator Guide Document Version 2017-07
1.1.6 Web User Interface Programming
To Next Page
Loading...
