RETRIVE_TRANS_HOLD_OPER_CHANGE
Value Format BOOLEAN
Description Specifies the action for retrieving transfer-hold calls by pressing a Line
key.
Note
• The action for retrieving a conference call on hold by pressing
a Line key in the conference call sequence also follows this
setting.
Value Range
• Y: Disconnect the current call
• N: Follow the "AUTO_CALL_HOLD" setting
Default Value
N
REMOVE_PREFIX_ENABLE
Value Format BOOLEAN
Description Specifies whether to enable omitting "+" included in overseas telephone
numbers when making or receiving a call.
Value Range
• Y: Enable
• N: Disable
Default Value
N
5.3.33 Logging Settings
SYSLOG_ADDR
Value Format STRING
Description Specifies the IP address or FQDN of Syslog server.
Value Range Max. 256 characters
Default Value Empty string
SYSLOG_PORT
Value Format INTEGER
Description Specifies the port of Syslog server.
Value Range 1–65535
Default Value 514
Document Version 2017-07 Administrator Guide 353
5.3.33 Logging Settings
To Next Page
Loading...
