Features 3-53
3 Features D
Display, Call Information
Description A display proprietary telephone shows the user the following call
information.
Extension number and name
These are shown when calling or when called by an extension
user, during an established intercom call, and while on-hook.
Display example: 102: Smith
Dialed telephone number
This is shown when dialing the telephone number.
Display example: 91234567890
Number or name of the caller
These are shown if the Caller ID feature is available.
Display examples: 1234567890
Panasonic
Call duration
This is shown during an established outside call. The display
remains for five seconds after the call is finished.
Display example: CO 2 0:02'28
Conditions • Extension numbers and names are programmable. If an extension name
is not stored, only the extension number will be displayed.
• The display does not show the intercom call duration.
• The outgoing outside call duration starts when the programmable timer
expires.
Programming References
Section 4, System Programming
[009] Extension Number Assignment
[204] Call Duration Count Start Time
[604] Extension Name Setting
Feature Reference Section 3, Features
Caller ID
Operation References Not applicable.
To Next Page
Loading...
