Panasonic KXTA308 - ANALOG PBX - External Music Source Connection

Installation 2-15
2.3.6 External Music Source Connection
One music source, such as a radio (user-supplied), can be connected
to the KX-TA308 as illustrated below.
Insert the plug to the earphone/headphone jack
on the external music source.
Use an EIAJ RC-6701 A plug (two-conductor,
ø 3.5 mm in diameter).
• Input impedance: 8 Ω
Maximum length of the cable
AWG 18 – 22: Under 10 m {33 feet}
External Music source
External Music Jack
EXT. MUSIC
Note • System programming for the music source used for Music on Hold is
required.
• To adjust the sound level of the Music on Hold, use the volume control
on the external music source.
Programming Reference
Section 4, System Programming
[111] Hold Music Selection
Feature References Section 3, Features
Background Music (BGM)
Music on Hold