Features 3-119
3 Features T
Time (Day/Night/Lunch) Service
Description The system supports the day, night and lunch operation modes. The
system operation for originating and receiving calls can be different
for the day, night and lunch modes. The system operation for
restricting toll calls can be programmed to prevent unauthorized toll
calls in each mode.
Changing the Day/Night/Lunch Modes
The day/night/lunch modes can be changed either automatically at a
pre-assigned time or manually by the operator or manager at any
desired time.
Automatic Time Service: If a user selects the automatic
changing mode, the system will change the day/night/lunch
modes at the programmed time each day. The starting time of
the day/night/lunch modes can be set for each day of the week.
Manual Time Service: If a user selects the manual changing
mode, the operator or manager can change the day/night/lunch
modes by dialing the feature number.
Conditions • The following programming items may be assigned differently for the
day mode, night mode and lunch mode.
[405]–[407] Flexible Outward Dialing Assignment
— Day/Night/Lunch
[408]–[410] Flexible Ringing Assignment — Day/Night/Lunch
[411]–[413] Delayed Ringing Assignment — Day/Night/Lunch
[414]–[416] Outside (CO) Line Mode — Day/Night/Lunch
[601]–[603] TRS – Class of Service (COS) Assignment
— Day/Night/Lunch
[700]–[702] Doorphone Ringing Assignment — Day/Night/Lunch
[703]–[705] Door Opener Assignment — Day/Night/Lunch
• The operator or manager can change the day, night or lunch mode even
if the automatic changing mode is selected.
Programming References
Section 4, System Programming
[006] Time (Day/Night/Lunch) Service Changing Mode
[007] Time (Day/Night/Lunch) Service Start Time
Feature References None
Operation References Telephone Features
— User Manual
Time (Day/Night/Lunch) Service
Operator/Manager Service Features
Time (Day/Night/Lunch) Service Setting
To Next Page
Loading...
