Panasonic KXTA308 - ANALOG PBX - Flexible Ringing Assignment - Day;Night;Lunch

4-62 System Programming
4.2 System Programming
Flexible Ringing Assignment — Day/Night/Lunch
408–410
Description Allows more than one extension to ring in the day, night and lunch
modes. All incoming calls from the programmed outside (CO) lines
are directed to the specified extensions.
Selection • Outside (CO) line number: 1 – 3, ( = all outside (CO) lines)
• Jack number: 01 – 08, ( = all jacks)
• Disable / Enable
Default All outside (CO) lines – all jacks – Enable — Day/Night/Lunch
Programming 1. Enter a program address (408 for day, 409 for night or 410
for lunch).
Display example: Day In CO
2. Press NEXT.
Display: CO NO? →
3. Enter an outside (CO) line number.
Pressing NEXT also can enter outside (CO) line number 1.
Display example: CO 1:#01:Enable
4. Enter the jack number after pressing the # key.
The user can also keep pressing or until the desired jack
number is displayed.
5. Keep pressing SELECT until the desired selection is
displayed.
6. Press STORE.
7. To program another jack, press or
,
or # and enter the
desired jack number.
8. Repeat steps 5 through 7.
9. To program another outside (CO) line, press NEXT or
PREV, or SELECT and the desired outside (CO) line
number.
10. Repeat steps 4 through 9.
11. Press END.