4.2 System Programming
Flash Mode for a Station Locked Extension
4-28 System Programming
108
Description Assigns whether or not an extension where the electronic station
lockout feature has been set, can send a flash signal during a
conversation with an external party.
Selection Enable / Disable
Default Disable
Programming 1. Enter 108.
Display: Locked Ext Flash
2. Press NEXT.
Display example: FLASH:Disable
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions None
Feature Reference Section 3, Features
Electronic Station Lockout
To Next Page
Loading...
