4-32 System Programming
4.2 System Programming
DSS Button Indication Mode
112
Description Enables or disables the Busy Lamp Field (BLF) on a DSS button
assigned to a flexible CO button to indicate the Forward (FWD) or
Do Not Disturb (DND) status of corresponding extensions.
Selection Enable (FWD/DND — flashing) / Disable (FWD/DND — off)
Default Enable
Programming 1. Enter 112.
Display: DSS Indication
2. Press NEXT.
Display example:Enable
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions None
Feature References None
To Next Page
Loading...
