3-36 Features
C 3 Features
Caller ID
Description Provides a display proprietary telephone user with the caller’s
information, such as their name and telephone number, on the
outside (CO) line assigned to receive Caller ID service calls.
Conditions • The outside (CO) lines where the Caller ID service is offered by a
Central Office must be assigned.
• A display PT (KX-TA30830) user can record the caller information
received by Caller ID (Call Log, Incoming feature).
• If the Caller ID service provides both the number and name, the user can
select the initial display, number or name, by system programming.
• An assigned name in program [011] “System Speed Dialing Name
Setting” will be displayed when the caller’s telephone number matches
one of System Speed Dialing numbers assigned in program [001]
“System Speed Dialing Entry” and a Central Office does not provide the
caller’s name.
• If a Central Office provides a caller’s name, the name from the Central
Office will be displayed even when a name assigned in program [011] is
effective.
Programming References
Section 4, System Programming
[900] Caller ID Assignment
[901] Caller ID Area Code Assignment
[902] Caller ID Modification for Local Calls
[903] Caller ID Modification for Long Distance Calls
[904] Caller ID Log Priority Selection
[906] Caller ID SMDR Format
[907] Caller ID SMDR Printout Selection
[915] Caller ID Checksum
Feature Reference Section 3, Features
Call Log, Incoming
Operation References Telephone Features
— User Manual Call Information/Log, Incoming
Call Log, Incoming
To Next Page
Loading...
