4-48 System Programming
4.2 System Programming
Toll Restriction — System Speed Dialing Boundary Class
301
Description Assigns the Toll Restriction class for System Speed Dialing
numbers.
Selection Boundary COS-1 / Boundary COS-2 / Boundary COS-3 /
Boundary COS-4 / Boundary COS-5
Default Boundary COS-1
Programming 1. Enter 301.
Display: SSD Boundary
2. Press NEXT.
Display example: Boundary COS-1
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions None
Feature Reference Section 3, Features
Toll Restriction for System Speed Dialing
To Next Page
Loading...
