3-102 Features
P 3 Features
Pulse to Tone Conversion
Description This feature allows the extension user to change from pulse dialing
to tone (DTMF) dialing so that the user can access special services,
such as computer telephone services or Voice Mail, which require
tones.
Conditions • This feature only works for outside (CO) lines which have set the Pulse
Dialing mode or Call Blocking mode.
• The user can select the dial mode for each outside (CO) line using the
Dial Type Selection feature.
• Changing from tone to pulse is not possible.
Programming References
Section 4, System Programming
[119] Redialing After Pulse to Tone Conversion
[401] Dial Mode
Feature Reference Section 3, Features
Dial Type Selection
Operation Reference Telephone Features
— User Manual Pulse to Tone Conversion
To Next Page
Loading...
