System Programming 4-113
4.2 System Programming
Doorphone Ringing Time
708
Description Selects the doorphone ringing time.
Selection • Doorphone number: 1 – 2, ( = all doorphones)
• 15 sec / 30 sec (seconds)
Default All doorphones — 15 sec
Programming 1. Enter 708.
Display: Doorphone R-Time
2. Press NEXT.
Display: Door NO? →
3. Enter a doorphone number.
Pressing NEXT also can enter doorphone number 1.
Display example: DP-1:15 sec
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another doorphone, press NEXT or PREV, or
SELECT and enter the desired doorphone number.
7. Repeat steps 4 through 6.
8. Press END.
Condition • To assign all doorphones to the same selection, press the key in
step 3. In this case, the display will show: DP- :Mixed.
Feature Reference Section 3, Features
Doorphone Call
To Next Page
Loading...
