4.2 System Programming
System Speed Dialing Name Setting
011
System Programming 4-21
Description Assigns a name to each System Speed Dialing number. The name
will be displayed when making a call by using the System Speed
Dialing feature. It will also be used for the Caller ID feature.
Selection • Speed dialing number: 00 – 99
• Name: 16 characters (max.)
Default All speed dialing numbers — Not stored
Programming 1. Enter 011.
Display: Speed Dial Name
2. Press NEXT.
Display: Speed NO? →
3. Enter a speed dialing number.
Pressing NEXT also can enter speed dialing number 00.
Display example: 00:Not Stored
4. Enter a name.
For entering characters, please refer to “4.1.3 Entering Characters”.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new name.
5. Press STORE.
6. To program another speed dialing number, press NEXT or
PREV, or SELECT and enter the desired speed dialing
number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • Speed dialing numbers are programmed in program [001] “System
Speed Dialing Entry”.
• Each name has a maximum of 16 characters.
Feature Reference Section 3, Features
System Speed Dialing
To Next Page
Loading...
