4.2 System Programming
Do Not Disturb Override
System Programming 4-103
Description Enables or disables performing the Do Not Disturb (DND)
Override feature.
Selection • Jack number: 01 – 08, ( = all jacks)
• Disable / Enable
Default All jacks – Disable
Programming 1. Enter 609.
Display: DND Override
2. Press NEXT.
Display: Jack NO? →
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: #01:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
Condition • To assign all jacks to the same selection, press the key in step 3. In
this case, the display will show: # :Mixed.
Feature Reference Section 3, Features
Do Not Disturb (DND) Override
609
To Next Page
Loading...
