4.2 System Programming
Caller ID Checksum
4-138 System Programming
Description Enables or disables to select the checksum mode. Normally, it
should not be necessary to change the default setting.
For further details on the checksum, consult your dealer.
Selection • Enable / Disable
Default Enable
Programming 1. Enter 915.
Display: CID Check Sum
2. Press NEXT.
Display example: Enable
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions None
Feature References Section 3, Features
Caller ID
Caller ID Call Waiting
915
To Next Page
Loading...
