System Programming 4-33
4.2 System Programming
Extension Ringing Pattern Selection
115
Description Selects the extension ringing pattern when an intercom call is
received.
The ringing patterns are shown below.
Selection Single / Double / Triple
Default Double
Programming 1. Enter 115.
Display: Ext Ring Pattern
2. Press NEXT.
Display example: Double
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions • The programs [423] “Outside (CO) Line Ringing Pattern Selection” and
[706] “Doorphone Ringing/Tone Pattern Selection” should be
considered when assigning this program.
Feature Reference Section 3, Features
Ringing Pattern Selection for Intercom Calls and Outside (CO) Lines
To Next Page
Loading...
