4.2 System Programming
One-Touch Transfer Using a DSS Button
4-14 System Programming
005
Description Enables or disables automatically holding an outside call when a
DSS button assigned to a flexible button on a proprietary telephone
is pressed. Through this assignment, the button can perform the
following.
• With Transfer — Merely pressing a DSS button is enough to put
an outside call on hold and execute the transfer;
there is no need to press the TRANSFER button.
• Without Transfer — To transfer an outside call, it is necessary to
first press the TRANSFER button and then a
DSS button. Just pressing the DSS button
will not execute the transfer.
Selection With Transfer / Without Transfer
Default With Transfer
Programming 1. Enter 005.
Display: DSS Mode
2. Press NEXT.
Display example: With Transfer
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Condition • This assignment applies to all DSS buttons on all proprietary telephones
in the system.
Feature Reference Section 3, Features
One-Touch Transfer Using a DSS Button
To Next Page
Loading...
