Features 3-79
3 Features L
Line Access, Outside (CO) Line Group
Description Allows an extension user to access an outside (CO) line group. An
idle line is selected from the outside (CO) line group. To specify an
outside (CO) line group, dial the feature number (8) and the desired
outside (CO) line group number (1 through 3). A proprietary
telephone user can also specify an outside (CO) line group by
pressing a Group-CO button.
Conditions • An idle line is selected in sequence from the lines in the specified
outside (CO) line group.
• Group-CO buttons must be programmed prior to use.
• If Idle Line Preference – Outgoing is set on the telephone, the user can
access an idle line only by going off-hook.
• Each extension is subject to system programming items to access
outside (CO) lines.
• After an outside (CO) line is seized, the system waits for a programmed
time before dialing.
Programming References
Section 4, System Programming
[206] Dialing Start Time
[400] Outside (CO) Line Connection Assignment
[404] Outside (CO) Line Group Assignment
[405]–[407] Flexible Outward Dialing Assignment — Day/Night/Lunch
Station Programming . . . . . . . . . User Manual
Flexible Button Assignment – Group-CO (G-CO) Button
Feature References Section 3, Features
Button, Group-CO (G-CO)
Outside (CO) Line Connection Assignment – Outgoing
Outside (CO) Line Group
Operation Reference Telephone Features
— User Manual Outward Dialing – Line Access, Outside (CO) Line Group
To Next Page
Loading...
