3-66 Features
E 3 Features
External Feature Access
Description Allows an extension user to access the features of a host PBX or
Central Office, such as Call Waiting, etc. This is performed by
putting the current party on hold and sending a flash signal.
Conditions • This feature is effective only during an outside call. However, if the
FLASH feature (Disconnection signal) is activated by the user, this
feature will not work.
• The flash time must be assigned as required by the host PBX or outside
(CO) line.
• With a proprietary telephone, the FLASH/RECALL button is used to
perform this feature . With a single line telephone, flashing the
hookswitch and entering the feature number are used to perform this
feature .
• During outside calls, a FLASH stored in System Speed Dialing,
Personal Speed Dialing or One-Touch Dialing features as External
Feature Access, not as a Flash.
Programming References
Section 4, System Programming
[110] Flash Key Mode
[418] Flash Time
Feature References Section 3, Features
Flash
Host PBX Access
Operation Reference Telephone Features
— User Manual External Feature Access
To Next Page
Loading...
